You are here:Home>News>Textile Machinery

Textile Machinery

Old disconnection of the embroidery machine fault analysis and troubleshooting tips

Published on:2013/5/14 15:25:11

Keyword:Embroidery machines, needle plate
Introduction:Old embroidery machine disconnection fault analysis and troubleshooting tips: Three eyeliner hook hole scared --- sand Pila light

 Old embroidery machine disconnection fault analysis and troubleshooting tips: 

 
Three eyeliner hook hole scared --- sand Pila light 
 
The needle plate hole scared --- sand Pila light 
 
Clip strip, clip the line screw scared --- sand Pila light 
 
The positioning hook hairy --- with sand Pila light 
 
The positioning hook and bobbin frame gap gap unreasonable --- adjust the gap 
 
Surface line elastic the folder line failure --- clear elastic in the garbage 
 
The needle groove direction is not correct --- adjust the needle groove direction of the captain slot alignment operator 
 
Bottom thread tension is too large --- properly regulate the pressure line board the shuttle skin tension evenly 
 
Machine pinhole fast mouth cut off --- exchange needle 
 
The thickness of the needle and embroidery thread unworthy --- according to the thickness of the embroidery thread needle thickness Model 
 
The rotating hook tip scared --- polishing rotating hook tip or change the bobbin case 
 
The surface line lubricating --- application of silicone oil lubrication 
 
Shuttle scared enable line blocked Pila --- sand or polish scared at 
 
The scared thread take-hole --- with sand Pila light